AEG OKO-SANTO 2842-6 i Instructions d'utilisation et d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG OKO-SANTO 2842-6 i. AEG OKO-SANTO 2842-6 i 28 pages. Integrating fridge freezer
Également pour AEG OKO-SANTO 2842-6 i : Instructions d'utilisation et d'installation (14 pages)

AEG OKO-SANTO 2842-6 i Instructions d'utilisation et d'installation
Malfunction
The compressor does not
start immediately after chan-
ging the temperature set-
ting.
Water on the floor or on sto-
rage shelves.
If, after carrying out the necessary checks there is still a fault with
your appliance please contact your local AEG Service Force Centre.
In guarantee customers should ensure that the suggested checks
have been made as the engineer will make a charge if the fault is not
a mechanical or electrical breakdown.
Please note that proof of purchase is required for any in-guarantee
service calls.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the
light bulb, switch off the appliance and unplug it, or pull the fuse.
Light bulb data: 220-240 V, max. 15 W
1.
To switch off the appliance, turn
the temperature regulator to posi-
tion "0".
2.
Unplug the mains plug.
3.
To change the light bulb, unscrew
the light cover.
4.
Unhook the light bulb cover as
shown.
5.
Change the defective light bulb.
6.
Refit the light bulb cover and the
screw.
7.
Put the refrigerator back into ope-
ration.
16
Possible Cause
This is normal, no error has
occurred.
Water drain hole is blocked.
Remedy
The compressor starts after
a period of time.
See the "Cleaning and
Care" section.
AEG65