Fujitsu fi-475PR Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu fi-475PR. Fujitsu fi-475PR 49 pages.

Imprimer la page

Fujitsu fi-475PR Manuel de l'utilisateur

FCC Declaration:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTICE

• The use of a non-shielded interface cable with the referenced device is prohibited. The length of the parallel interface

cable must be 3 meters (10 feet) or less. The length of the serial interface cable must be 15 meters (50 feet) or less.

• The length of the power cord must be 3 meters (10 feet) or less.

ICES:

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformme à la norme NMB-003 du Canada.

High Safety Required Use:

The Product is designed, developed and manufactured as contemplated foe general use, including without limitation,

general office use, personal use and household use, but is not designed, developed and manufactured as contemplated

for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death,

personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without

limitation, nuclear power core control, airplane control, air traffic control, mass transport operation control, life

support, weapon launching control. The Customer shall not use the Product without securing the sufficient safety

required for the High Safety Required Use. In addition, Fujitsu (or other affiliate's name) shall not be liable against

the Customer and/or any third party for any claims or damages arising in connection with the High Safety Required

Use by the Customer of the Product.

Energy Saving:

As an E

Partner, Fujitsu Limited has determined that this scanner meets E

NERGY

TAR

energy efficiency. E

NERGY

The contents of this manual may be revised without prior notice.

Printed in Japan.

No part of this manual may be reproduced in any form without permission.

is a U. S. registered mark.

TAR

guidelines for

NERGY

TAR