AEG QR2210W Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG QR2210W. AEG QR2210W 28 pages. Aeg refrigerator

Imprimer la page

Do not pull the mains cable.

If the power plug socket is loose,

do not insert the power plug. There

is a risk of electric shock or fire.

You must not operate the appli-

ance without the lamp cover (if

foreseen) of interior lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from

the freezer compartment if your hands

are damp/wet, as this could cause skin

abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

• Bulb lamps (if foreseen) used in this ap-

pliance are special purpose lamps se-

lected for household appliances use

only. They are not suitable for house-

hold room illumination.

DAILY USE

• Do not put hot pot on the plastic parts

in the appliance.

• Do not store flammable gas and liquid

in the appliance, because they may ex-

plode.

• Appliance's manufacturers storage rec-

ommendations should be strictly ad-

hered to. Refer to relevant instructions.

CARE AND CLEANING

• Before maintenance, switch off the ap-

pliance and disconnect the mains plug

from the mains socket.

• Do not clean the appliance with metal

objects.

• Regularly examine the drain in the re-

frigerator for defrosted water. If neces-

sary, clean the drain. If the drain is

blocked, water will collect in the bot-

tom of the appliance.

INSTALLATION

For electrical connection carefully

follow the instructions given in

specific paragraphs.

• Unpack the appliance and check if

there are damages on it. Do not con-

nect the appliance if it is damaged. Re-

port possible damages immediately to

the place you bought it. In that case re-

tain packing.

• It is advisable to wait at least four hours

before connecting the appliance to al-

low the oil to flow back in the compres-

sor.

• Adequate air circulation should be

around the appliance, lacking this leads

to overheating. To achieve sufficient

ventilation follow the instructions rele-

vant to installation.

• Wherever possible the back of the

product should be against a wall to

avoid touching or catching warm parts

(compressor, condenser) to prevent

possible burn.

• The appliance must not be located

close to radiators or cookers.

• Make sure that the mains plug is acces-

sible after the installation of the appli-

ance.

• Connect to potable water supply only

(If a water connection is foreseen).

SERVICE

• Any electrical work required to do the

servicing of the appliance should be

carried out by a qualified electrician or

competent person.

• This product must be serviced by an au-

thorized Service Centre, and only genu-

ine spare parts must be used.

ENVIRONMENT PROTECTION

This appliance does not contain

gasses which could damage the

ozone layer, in either its refriger-

ant circuit or insulation materials.

The appliance shall not be discar-

ded together with the urban re-

fuse and rubbish. The insulation

foam contains flammable gases:

the appliance shall be disposed

according to the applicable regu-

lations to obtain from your local

authorities. Avoid damaging the

cooling unit, especially at the rear

near the heat exchanger. The ma-

terials used on this appliance

marked by the symbol

cyclable.

ENGLISH

are re-