Brother MFC-8950DW Manuel d'installation rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC-8950DW. Brother MFC-8950DW 44 pages. Laser printers
Également pour Brother MFC-8950DW : Manuel (36 pages), Manuel du réseau (29 pages), Manuel (27 pages), Manuel (21 pages), Manuel de l'utilisateur (23 pages), Manuel d'installation rapide (43 pages), Manuel de sécurité des produits (23 pages)

Imprimer la page
Brother MFC-8950DW Manuel d'installation rapide
14

Dial Prefix

The dial prefix setting will automatically dial a
predefined number before every fax number you dial.
For example: If your phone system requires a 9 to dial
an outside number this setting will automatically dial 9
for every fax you send.
a
Press Menu.
b
Press a or b to display Initial Setup.
Press Initial Setup.
c
Press a or b to display Dial Prefix.
Press Dial Prefix.
d
Press On.
e
Press Dial Prefix.
f
Enter the prefix number (up to 5 digits) using
the buttons on the Touchscreen, and then
press OK.
Note
• You can use the numbers 0 to 9, #, l and !.
• You cannot use ! with any other numbers or
characters.
• If your telephone system requires a timed break
recall (hookflash), press ! on the Touchscreen.
• If the pulse dialing mode is on, # and l are not
available to use. (Canada only)
g
Press Stop/Exit.
15
Automatic Daylight
Saving Time
You can set the machine to change automatically for
Daylight Saving Time. It will reset itself forward one
hour in the Spring and backward one hour in the Fall.
a
Press Menu.
b
Press a or b to display Initial Setup.
Press Initial Setup.
c
Press a or b to display Date&Time.
Press Date&Time.
d
Press Auto Daylight.
e
Press On (or Off).
f
Press Stop/Exit.
16

Set the Time Zone

You can set the time zone (not summer time but
standard time) on the machine for your location.
For example, the time zone for Eastern Time in the
USA and Canada is UTC-05:00.
a
Press Menu.
b
Press a or b to display Initial Setup.
Press Initial Setup.
c
Press a or b to display Date&Time.
Press Date&Time.
d
Press Time Zone.
e
Press + or - to set your time zone.
Press OK.
f
Press Stop/Exit.
13