Brother MFC-J430w Manuel de l'utilisateur avancé - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur avancé pour {nom_de_la_catégorie} Brother MFC-J430w. Brother MFC-J430w 47 pages. Product safety guide - spanish
Également pour Brother MFC-J430w : Manuel (12 pages), Manuel (21 pages), Manuel de sécurité des produits (17 pages), Manuel d'installation rapide (37 pages), Manuel de sécurité (17 pages), Manuel d'installation rapide (37 pages), Manuel de l'utilisateur (41 pages), Manuel de démarrage rapide (37 pages), Manuel de démarrage rapide (22 pages), Manuel de l'utilisateur (40 pages), (espagnol) Manuel (21 pages), (espagnol) Manuel (16 pages)

Imprimer la page
Brother MFC-J430w Manuel de l'utilisateur avancé

Changing fax resolution

The quality of a fax can be improved by
changing the fax resolution.
a
Press
(FAX).
b
Press a or b to choose
Fax Resolution.
Press OK.
c
Press a or b to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
Black & White
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Setting your changes as the
3
new default
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press a or b to choose the setting you
want to change, and press OK. Then
press a or b to choose your new option.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring fax settings to the
factory settings
You can restore the fax settings
Fax Resolution, Contrast,
Glass ScanSize, and Real Time TX,
that you have changed, to the factory
settings. These settings will stay until you
change them again.
a
Press
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Sending a fax
(FAX).
(FAX).
3
3
3
9