Fujitsu FTP-642MCL001 Fiche technique - Page 3
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Fujitsu FTP-642MCL001. Fujitsu FTP-642MCL001 7 pages. 24v drive, high speed line thermal printer 4” mechanism, with or without cutter
Imprimer la page
(Continued)
Item
Part number
Interface
For head
Power supply
For motor
For cutter
For logic
Mechanism (cutter)
Dimension
Interface board
Weight (Mechanism+Cutter)
Mechanism
Expected life
Cutter
Operating temperature
Environmental
Operating humidity
conditions
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Head-up
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5 C ~+40 C.
FTP-642MCL001/002/301/302
Specifications
FTP-642MCL001/002
TM
Centronics (ESC/POS
), RS232C
24VDC
5%, Voltage
* 2
Current : average
( ): Peak
1.61 (2.03) A (at 80 mm/s printing speed, 25% printing ratio)
1.17 (2.03) A (at 50 mm/s printing speed, 25% printing ratio)
1.08 (1.16) A (at 30 mm/s printing speed, 25% printing ratio)
24VDC
5%, 1.0 A maximum
----------
5VDC
5%, 0.5 A maximum
138 (W) 48 (D) 20 (H) mm (excluding lever)
131 (W)
89 (D)
24 (H) mm
approximately 125 g
8
Pulse durability : 1
10
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance
: 50 km (at 25% printing ratio)
----------
* 3
0 to +50 C
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
By microswitch
For front insertion use (112 mm width)
For rear insertion use (114 mm width)
*Recommended papers
· Oji paper
· NIPPON paper
· MITSUBISHI paper Mills
FTP-642MCL301/302
24VDC
5%, 1.0 A maximum
147 (W) 69 (D) 42 (H) mm (w/cutter)
approximately 450 g (w/cutter)
5
3
10
cuts
: FTP-040PU001, FTP-040P0701
: FTP-040P0020, FTP-040P0702
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
3