Brother MFC490CW - Color Inkjet - All-in-One Manuel d'installation rapide - Page 31

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 47 pages. Mac network connection
Également pour Brother MFC490CW - Color Inkjet - All-in-One : Manuel d'installation rapide (48 pages), Mise en place et installation (5 pages), Manuel de connexion (6 pages), Instructions de réparation (2 pages)

Brother MFC490CW - Color Inkjet - All-in-One Manuel d'installation rapide
For Wireless Network Users
You can use the d and c keys to move the
cursor left and right. For example, to enter the
letter a, press the 2 key on the dial pad once.
To enter the number 3, press the 3 key on the
dial pad seven times.
The letters appear in this order: lower case,
upper case and then numbers.
(For more information, see Entering Text for
Wireless Settings on page 45.)
Press OK when you have entered all the
characters, then press 1 for Yes to apply your
settings. Go to i.
i
Your machine will now try to connect to your
wireless network using the information you
have entered. If successful, Connected will
appear briefly on the LCD.
If your machine does not successfully connect
to your network, verify your network settings
collected in step 14 on page 29 then repeat a
to h to make sure you have entered the correct
information.
If your access point does not have DHCP
enabled you will need to manually configure
the IP address, subnet mask and gateway of
the machine to suit your network. See the
Network User's Guide for details.
Wireless setup is now complete. A four
level indicator at the top of your
machine's LCD will show the wireless
signal strength of your access point or
router.
To install MFL-Pro Suite, continue to
step 16.
®
For Windows
Users:
Now go to
Page 34
®
For Mac OS
Users:
Now go to
Page 38
31