Fujitsu ScanPartner 620C Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu ScanPartner 620C. Fujitsu ScanPartner 620C 28 pages. Image scanner
Également pour Fujitsu ScanPartner 620C : Spécifications (2 pages), Instructions de remplacement et de nettoyage des consommables (7 pages), Procédures d'installation (5 pages)

2.7 CONNECTING THE CABLE

i).

Turning the Power Off

Depress the side marked " O" to turn the power off.

Connect the power cable and SCSI signal cable as shown in Figure 2-8 and Figure 2-9.

ii).

Turning the Power On

Depress the side marked " I" to turn the power on. The POWER LED will light. If not, please check

the power source.

iii).

SCSI Termination

The Fujitsu ScanPartner 620C comes complete with a built-in SCSI terminator. If the Scanner is

the last device in a SCSI chain, the Terminator should be switched ON. If the scanner is not the

last device, the Terminator should be OFF. The Terminator ON/OFF switch is located on the

back of the scanner, to the left of the SCSI cable connectors.

Host PC

Term.

Host PC

Term.

Scanner

(Terminator Off)

Scanner

(Terminator On)

2-10

SCSI Device

Term.