Fujitsu PenCentra 130 Instructions d'installation

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Fujitsu PenCentra 130. Fujitsu PenCentra 130 1 pages. Hd portable accessories
Également pour Fujitsu PenCentra 130 : Manuel de l'utilisateur (2 pages), Manuel de l'utilisateur (8 pages), Manuel de l'utilisateur (2 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (2 pages), Fiche technique (3 pages)

FMWHS3

Hand Strap

Installation Instructions

PenCentra 130 and 200

The hand strap can be attached to your PenCentra 130 or

PenCentra 200 pen tablet to provide additional support

while using the system in a hand-held position.

Installing the Hand Strap

The hand strap can be installed in on of two locations on

the pen tablet to accommodate right- or left-handed

users. To install the hand strap,

1. Using a sharp object such as a penknife, pry the

round, adhesive covers from the back of the system

to expose the screw bosses in the location that you

want to install the hand strap. See Figure 1 for the

screw boss locations.

Serial

Port

Door

Left Handed User

Right Handed User

Figure 1. Hand Strap Fastening Points

2. Use the screws provided to attach the hand strap in

the desired location as shown in Figure 2.

3. The hand strap is now attached to your system.

Using the Hand Strap

4. If you are a right-handed user, install and use the

hand strap as shown in Figure 3. The Velcro strip

on the hand strap allows you to adjust the strap to

the most comfortable position. If you are a

left-handed user, install and use the hand strap as

shown in Figure 4.

6/00

Removable

Battery Pack

Figure 2. Installing the Hand Strap

Figure 3. Using the Hand Strap (Right-handed User)

Figure 4. Using the Hand Strap (Left-handed User)

58-0687-00B