Fujitsu Stylistic LT LT Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu Stylistic LT LT. Fujitsu Stylistic LT LT 8 pages. Pen tablet holster for pencentra 130, stylistic lt 0
Également pour Fujitsu Stylistic LT LT : Manuel de l'utilisateur (2 pages), Instructions pour l'utilisateur (1 pages), Manuel d'installation (4 pages), Instructions d'installation (1 pages), Manuel de l'utilisateur (2 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (1 pages), Instructions pour l'utilisateur (1 pages), Instructions d'installation (1 pages), Manuel d'installation (1 pages), Instructions pour l'utilisateur (1 pages)

Fujitsu Stylistic LT LT Manuel de l'utilisateur
58-0581-01.fm Page 5 Tuesday, August 21, 2001 9:28 AM

Operational Considerations

Issues to consider when you use the FMW51BC1 or
FMW51BC2 battery charger are discussed as follows:
You can insert up to two battery packs at a time in the
battery charger. When charging two battery packs, you can
insert or remove either battery pack independently.
The battery charger only charges one battery pack at a
time. When two battery packs are inserted in the charger,
the battery pack installed first is charged first.
The battery charger will indicate a full charge level and
will not begin charging the battery pack if the battery pack
charge level is 90% or higher when the battery pack is
initially inserted in the charger. This prevents the battery
pack from being overcharged.
When you remove the battery pack from your pen tablet,
always insert a charged battery pack in the pen tablet to
replace the one that you removed, or apply DC power.
The FMW51BP1, FMW29BP1, FMW29BP2, FMW43BP2
and FPCBP48 battery packs use lithium ion battery cells
which have no "memory effect." You do not need to com-
pletely discharge or "condition" the battery pack before
charging.
Battery Pack Charge Time
The approximate maximum amount of time needed to
charge a fully discharged battery pack to the 90% level is
shown in the following table. Note that when two battery
packs are installed in the charger, they are charged sequen-
tially (starting with the battery pack that is installed first).
5