Fujitsu T4410 - LifeBook Tablet PC Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu T4410 - LifeBook Tablet PC. Fujitsu T4410 - LifeBook Tablet PC 8 pages. Lifebook t series
Également pour Fujitsu T4410 - LifeBook Tablet PC : Manuel de diagnostic (10 pages), Manuel de récupération (8 pages), Pour commencer (13 pages), Manuel Bios (27 pages)
Imprimer la page
CHANGING THE BASE WIDTH
The port replicator is designed for Tablet PC
models with 12.1" and 13.3" displays. To
determine if the port replicator is designed
for your system, go to www.shopfujitsu.com
-> Accessories, and check the port replicator
compatibility list.
When viewing the port replicator from the
top an adjustable bracket is located on the
left of the device (see Figure 2 for location).
1
Adjustable Bracket
2
3
Groove
Figure 5. Adjusting the base bracket
The bracket is spring-based and should be
slid from left to right for the smaller display
and right to left for the larger one. A groove
in the base guides the bracket's direction.
To adjust the bracket from left to right, slide
it to the right, and then down until it latches
with the bottom portion of the groove (see
Figure 5). To move the bracket from right to
left, reverse the procedure.
7