Fujitsu CREMSON MODULAR STARTERKIT Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu CREMSON MODULAR STARTERKIT. Fujitsu CREMSON MODULAR STARTERKIT 36 pages.

Imprimer la page

Cremson Modular Starterkit

Chapter 4 Details of the included Monitor-Debugger

DEBUG - STACK: Displays the current stack contents in terms of function calls.

Parameters, if any, are given in brackets.

DEBUG - VECTOR: Reads out and displays the actual interrupt-vector table. Use the „jump"

function to display any code areas pointed to by an interrupt vector (e.g. interrupt service

routines used in your program).

DEBUG - CALL: This function can be used to „call" any routine defined in your code when

the debugger is halted.

Example: Enter „LCDprinthex(0x1234,4)" from any example project. The number 1234 will

appear on the LCD. The function-call will be terminated by showing the result (here : none).

You may restore the debugging context by „Clear call" if execution was stopped during the

function-call. Note that this example assumes that „LCDinitdisp" was executed before.

DEBUG – LOAD TARGET FILE: Starts a new download of the current load module (ABS

file). Usually this function will be executed automatically after starting the debugger (defined

in debug settings ; see „Project-Setup-Debug"). However, this function can be useful to re-

initialize the debugger for the current debug session.

VIEW - SYMBOL: This function displays all (global) symbols of the current project.

Information about the type (char, integer etc.) and the location (address in RAM or register)

can be shown using „detail".

VIEW - LOCAL: Similar to View-Symbol, but only local variables of the current function are

shown.

VIEW - COMMAND: From this window, the debugger can be controlled using a command

line input. All GUI functions are available as individual commands.

Examples :

step

examine PDRN

set break main

Dump/Halfword 100000..1000ff

Shortcuts to complex commands can be defined ("alias") and parameter strings can be

substituted by variables.

Example:

candump = Dump/Halfword

100000..1000ff

A set of commands can be combined to a "macro". Aliases and macros can be defined

using the command window context menu.

- 19 -