Fujitsu D1031 Manuel technique - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Fujitsu D1031. Fujitsu D1031 23 pages.

Settings on the system board

Recovering System BIOS - switch 1

Switch 1 enables recovery of the old system BIOS after an attempt to update has failed. To restore

the old BIOS you need a Flash BIOS Diskette (call customer service center). The existing BIOS

settings are meaningless for restoring the system BIOS (e.g. the Security menu in the Flash Write

field).

OFF

The System BIOS is started with the system BIOS from the system board (default

setting).

The system is started from the Flash BIOS Diskette in drive A. A recovery of the

system BIOS is executed.

If switch 1 is set to ON, switch 3 must be set to OFF (OPEN).

Switch 3 enables and disables system Flash BIOS updating. Before an update of the system BIOS

can be carried out, switch 1 must be set to OFF and write protection for the system BIOS must also

be disabled in the BIOS Setup (in the Security menu: the Flash Write field must be set to Enabled). If

you wish to update your system BIOS, please consult our customer service center.

System BIOS can be overwritten (default setting).

OFF

System BIOS is write protected.

Switch 4 is used to define whether floppy disks can be written or deleted in the floppy disk drive. To

write and delete floppy disks, the write protection in BIOS setup must be disabled (in menu Security,

the field Diskette Write must be set to Enabled).

Read, write and delete floppy disks is possible (default setting).

OFF

The floppy disk drive is write-protected.

8 - English

A26361-D1031-Z120-10-7419