Fujitsu D1527 Manuel technique - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Fujitsu D1527. Fujitsu D1527 44 pages.

Installation

Equip the mainboard with the processor, heat sink and memory modules before installation if

possible. Further information can be found in "Installing and removing processors" chapter.

Connect the plugs for the power supply, control panel and drives to the corresponding

connections on the mainboard.

Driver installation

Install the drivers for the chipset. The drivers are contained on the included "Drivers & Utilities"

CD. Please refer to chapter "Drivers" for a description of installing drivers.

A26361-D1527-Z120-1-6319

All manuals and user guides at all-guides.com

Open the casing as described in the

operating manual.

Should no suitable connection field be

provided in the case, then you must

install the connection field (1) provided.

Ensure the plate is aligned properly so that

the connections are suitable for the

mainboard later.

Set the mainboard on the edge on

which the connection field is located (2)

and then insert the board in the

case (3).

Make sure that spacers in the housing are

only mounted at points at which there are

mounting holes in the mainboard.

Fasten the mainboard with the screws.

List of features

English - 7