Fujitsu D2530 Manuel technique - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Fujitsu D2530. Fujitsu D2530 35 pages. For econel 200 s2

Features

Temperature / system monitoring

Fan control

The fans are controlled according to temperature.

Sensor monitoring

The removal of, or a fault in, a temperature sensor is detected. Should this

happen all fans monitored by this sensor run at maximum speed, to achieve the

greatest possible protection of the hardware.

Voltage monitoring

The most important voltages are monitored. When a voltage exceeds warning

level high or falls below warning level low an alert will be generated. Adequate

measurements can be done by running agents.

Cover monitoring

Unauthorised opening of the cover is detected, even when the system is

switched off. However, this will only be indicated when the system is switched

on again

System Event Log (SEL)

All monitored events of the system board are recorded in the System Event Log.

They could be retrieved after a system reboot via ServerView.

Technical Manual

D2530 (Econel 200 S2)