Fujitsu D3173 Spécifications - Page 19

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Fujitsu D3173. Fujitsu D3173 20 pages. Mainboard

Installing/removing main memory

Technical data

Technology

Total size

Module size

A current list of the memory modules recommended for this mainboard is available

on the Internet at: "http://ts.fujitsu.com/mainboards".

At least one memory module must be installed. Memory modules with different

memory capacities can be combined.

Only unbuffered DDR3 memory modules without ECC may be used.

DDR3 memory modules must comply with the PC3-10600 or PC3-12800 speciﬁcation.

Maximum system performance is achieved when identical memory modules

are used in Channel A and Channel B.

Depending on how the system is conﬁgured, the visible main memory can be reduced.

SO-DIMM 1 Channel A

SO-DIMM 1 Channel B

Slot to be used

Channel A, slot 1

Channel B, slot 2

The installation/removal is described in the "Basic information on mainboard" manual.

Fujitsu Technology Solutions

DDR3 1333 / 1,600 MHz unbuffered SO-DIMM modules 204 pin; 1.5 V;

64 bit, no ECC

1 to 16 GByte DDR3

1, 2, 4 or 8 GByte for one module

Number of memory modules inserted

English - 5