Fujitsu F2MC-16FX QFP-100P Manuel de l'utilisateur - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu F2MC-16FX QFP-100P. Fujitsu F2MC-16FX QFP-100P 34 pages. For dsu-fr emulator
Également pour Fujitsu F2MC-16FX QFP-100P : Manuel d'utilisation (14 pages)
Imprimer la page
4 Programming the internal Flash memory
All Flash devices have an internal bootloader for asynchronous- as well as synchronous-
Flash-programming:
< asynchronous-serial Flash-programming via X3
< synchronous-serial Flash-programming via X17
4.1 Asynchronous Mode
In order to program the Flash-ROM asynchronously, the tool "Fujitsu Flash MCU
Programmer for FMC16FX" can be used. This tool is available free on the Fujitsu Micros
DVD or Web Site (http://mcu.emea.fujitsu.com/: select < Software < Utilities)
The following procedure must be followed to enable Flash Programming:
1. Power off the board
2. Connect the Evaluation Board UART"A" or UART"B" to your serial PC communication
port. A straight 1:1 cable connection has to be used.
3. Check the Jumper-settings according to the UART as described in chapter 3.5
4. Configure the mode:
Dip-Switch S2
(Flash mode)
5. Power on the board
FMEMCU-UG-960010-12
SK-96320-80PMC User Guide
Chapter 4 Programming the internal Flash memory
MD0 MD1 MD2 nc
1
2
- 22 -
ON
OFF
3
4
© Fujitsu Microelectronics Europe GmbH