Fujitsu F2MC-8FX Series Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu F2MC-8FX Series. Fujitsu F2MC-8FX Series 24 pages. 8-bit microcontroller
Également pour Fujitsu F2MC-8FX Series : Manuel d'utilisation (20 pages), Note d'application (12 pages), Note d'application (23 pages), Manuel de configuration (18 pages), Manuel de configuration (19 pages), Manuel de configuration (30 pages), Note d'application (20 pages), Note d'application (21 pages), Manuel d'utilisation (21 pages), Manuel de configuration (23 pages), Manuel de configuration (17 pages)

9 Demo System

Power Control

Fan Control

Fan Delay Off

Buzz Control

Led Display

Keyboard

Kettle Detect

Kettle Empty Detect

Timing Power Off(3Hours)

Constant Power Heating

Constant Temperature Heating

IGBT Temp Detect

Plate Temp Detect

IGBT Temp Higher Protect (120℃)

Plate Temp Higher Protect (300℃)

Kettle Empty Protect (300℃)

Sensor Open/Short Detection

Over Current Protect (18A)

Over Voltage Protect (270V)

Lower Voltage Protect (150V)

Surge Protect (1000V)

No Operation for 2 Hours, auto turn off, if no timer

In the system design, we will use some feedback signals to protect system or calculate watt.

The protect signal include over current, over voltage, surge voltage and kettle detect.

Anyone of them appears, the system must stop work. If the IGBT temperature is raise over

60℃, the fan must turn on. If the IGBT temperature is raise over 120℃, the system must

stop work. If the kettle is empty, the plate temp will raise. If the temp rises up to 300℃, the

system must stop work.

Induction Heater C Library V1.1

Chapter 9 10BDemo System

MCU-AN-500089-E-11 – Page 20