Fujitsu Mainboard D2974 Brève description - Page 23

Parcourez en ligne ou téléchargez le pdf Brève description pour {nom_de_la_catégorie} Fujitsu Mainboard D2974. Fujitsu Mainboard D2974 26 pages.

Installing/removing or replacing processor (with heat sink)

Procedure

► Remove any fan and the heat sink.

► Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).

► Fold up the frame.

► Remove the old processor from the socket (3).

The bevelled corner of the processor may be in a different position

from that shown in the illustration.

► Insert the new processor in the socket so that the bevelled corner of the processor

matches the coding on the socket (A) with regard to the position (4).

► Push the lever back down until it clicks into place (5).

Please note that, depending on the heat sink used, different heat sink

mounts are required on the mainboard.

► Depending on the conﬁguration variant, you must pull a protective foil off the heat sink

or coat the heat sink with heat conducting paste before ﬁtting it.

► Depending on the processor variant, clips may also be supplied for mounting

the heat sink that ﬁx it in place.

Fujitsu Technology Solutions

English - 5