Fujitsu MB 86276 Manuel - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Fujitsu MB 86276. Fujitsu MB 86276 30 pages.

Prepared

Manfred Ortmann

Approved

2.2.11 Video Outputs

The digital RGB video output 0 from the LIME is connected to connector X402, transmitter

SiI164CT64 ( U400 ) and triple 8-Bit high speed video digital-to-analog converter ( DAC )

ADV7125JSTZ240 ( U402 ).

The digital RGB video output 1 from the LIME is connected to connector X403, transmitter

SiI164CT64 ( U401 ) and triple 8-Bit high speed video digital-to-analog converter ( DAC )

ADV7125JSTZ240 ( U403 ).

The type from X402 and X403 is FTSH-120-01-L-DV-EJ-P from Samtec, mate with Samtec

types FFSD , CLP , FLE , SFMC , SFMH , TFMDL.

The transmitter SiI164CT64 ( U400 and U401 ) from Silicon Image uses PanelLink® Digital

technology to support displays ranging from VGA to UXGA resolutions ( 25 – 165 Mpps ) in a

single link interface. The link interface of U400 is connected to DVI-I connector X400. The link

interface of U401 is connected to DVI connector X401.The SiI164 transmitter has a highly

flexible interface with either a 12-bit mode ( ½ pixel per clock edge ) or 24-bit mode 1-pixel /

clock input for true color ( 16.7 million ) support. In 24-bit mode, the SiI164 supports single or

dual edge clocking. In 12-bit mode, the SiI164 supports dual edge single clocking or single edge

dual clocking.

The SiI164 can be programmed though the I2C interface. The multi-function address inputs A1,

A2 and A3 of U400 are strapped to ground by resistors R409, R410 and R412 so the slave

address for readings is 0x71 and the slave address for writings is 0x70. The multi-function

address inputs of U401 A2 and A3 are strapped to ground by resistor R423 and R424 and A1 is

Checked

Pic. 2-16: Video output connectors

Preliminary

Document Number

Date

Revision

2008-05-23

PA 6.2

Storage

Mycable01

22(30)