Fujitsu MB2146-440-E Manuel de configuration - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Fujitsu MB2146-440-E. Fujitsu MB2146-440-E 23 pages. F2mc-8fx family mb95330 series 8-bit microcontroller ev board
Également pour Fujitsu MB2146-440-E : Manuel de configuration (19 pages)
Imprimer la page
■ Caution of the Products Described in this Document
Caution of the Products Described in this Document
The following precautions apply to the product described in this manual.
The following precautions apply to the product described in this manual.
WARNIN
Electric shock,
Electric shock,
Damage
Damage
Electric shock,
Damage
CAUTION
Cuts, Damage
Cuts
Damage
Damage
Damage
Damage
Damage
Damage
Damage
Damage
EV Board MB2146-440-E Setup Guide
PREFACE
Indicates a potentially hazardous situation which, if not avoided appropriately,
Indicates a potentially hazardous situation which, if not avoided appropriately,
could result in death or serious injury and/or a fault in the user's system.
could result in death or serious injury and/or a fault in the user's system.
Before performing any operation described in this manual, turn off all the powe
Before performing any operation described in this manual, turn off all the power
supplies to the system. Performing such an operation with the power on may
cause an electric shock or device fault.
Once the product has been turned on, do not touch any metal part of it. Doing so
may cause an electric shock or device fault.
Indicates the presence of a hazard that may cause a minor or moderate injury,
damages to this product or devices connected to it, or may cause to lose software
resources and other properties such as data, if the device is not used
appropriately.
Before moving the product, be sure to turn off all the power supplies and unplug
the cables. Watch your step when carrying the product. Do not use the product in
an unstable location such as a place exposed to strong vibration or a sloping
surface. Doing so may cause the product to fall, resulting in an injury or fault.
The product contains sharp edges that are left unavoidably exposed, such as
jumper plugs. Handle the product with due care not to get injured with such pointed
parts.
Do not place anything on the product or expose the product to physical shocks. Do
not carry the product after the power has been turned on. Doing so may cause a
malfunction due to overloading or shock.
Since the product contains many electronic components, keep it away from direct
sunlight, high temperature, and high humidity to prevent condensation. Do not use
or store the product where it is exposed to much dust or a strong magnetic or
electric field for an extended period of time. Inappropriate operating or storage
environments may cause a fault.
Use the product within the ranges given in the specifications.
Operation over the specified ranges may cause a fault.
To prevent electrostatic breakdown, do not let your finger or other object come into
contact with the metal parts of any of the connectors. Before handling the product,
touch a metal object (such as a door knob) to discharge and any static electricity
from your body.
Before turning the power on, in particular, be sure to finish making all the required
connections. Furthermore, be sure to configure and use the product by following
the instructions given in this document. Using the product incorrectly or
inappropriately may cause a fault.
Always turn the power off before connecting or disconnecting any cables from the
product. When unplugging a cable, unplug the cable by holding the connector part
without pulling on the cable itself. Pulling the cable itself or bending it may expose
or disconnect the cable core, resulting in a fault.
Because the structure of the MCU socket does not allow an evaluation MCU to be
mounted in the incorrect orientation, be very careful of the orientation of the
evaluation MCU when mounting it. Inserting the evaluation MCU in the wrong
orientation may damage the MCU, causing the MCU to become faulty.
Because the product has no casing, it is recommended that it be stored in the
original packaging. Transporting the product may cause a damage or fault.
Therefore, keep the packaging materials and use them in case of for the re-
shipment of the product.
Page 2