Fujitsu MB91360 SERIES Manuel de l'utilisateur - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fujitsu MB91360 SERIES. Fujitsu MB91360 SERIES 43 pages. Levelshifter board
Également pour Fujitsu MB91360 SERIES : Manuel de l'utilisateur (17 pages), Note d'application (35 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page

Fujitsu MB91360 SERIES Manuel de l'utilisateur

STARTERKIT MB91360

Chapter 5 Flash Programming

5 Flash Programming

Whenever your application has been developed, debugged and tested as explained in the

last chapter, it can be programmed to the internal flash ROM using the „MB91360 Flash

Programmer". This tool is a general flash programming utility, which allows programming the

internal flash ROM without any restrictions given by the starterkit.

5.1 Generic Flash Programmer

The tool „MB91360 Flash Programmer" is a general flash programming tool which does not

take care of the special features of this Starterkit. Therefore, it should be used to re-program

the monitor-kernel. On the CD-ROM, you will find some kernel files (MHX-format) which are

fixed for various baud rates. Make sure, you have the latest version available!

The tool can also be used to program any applications directly (without the possibility to

have any debugging functions later on). In this case, the evaluation board will act as a target

system only.

CAUTION: Take special care not to write anything to location 0FFEF4, the „security vector".

If you do, you will not be able to re-program the device ever again! See the hardware manual

for details!

Make sure you have installed the Flash Programmer from your CD-ROM. The package

includes the executable (Flashprg.exe) as well as some binary files (Brloadxx.bin) and a

user's guide (Flashprg.pdf).

Figure 4: MB91360 Flash Programmer

UG-910006-13

- 20 -