Indesit Aqualtis AQ D Series Manuel de service rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de service rapide pour {nom_de_la_catégorie} Indesit Aqualtis AQ D Series. Indesit Aqualtis AQ D Series 2 pages. 2008 lcd interface
Imprimer la page
Lavabiancheria Aqualtis 2008 Interfaccia LCD
Autotest function:
The autotest must be launched no later than 30 seconds after the appliance has been switched off.
The Autotest of appliances with LCD interface is started with the following steps.
Start with the appliance off:
1.
Press button 1 (you will hear a BEEP)
2.
Press button 2 (you will hear a BEEP)
3.
Press button 3 (you will hear a BEEP)
4.
Press button 4 (you will hear a BEEP)
5.
Press button 5 (you will hear a BEEP)
6.
Press button 6 (you will hear a BEEP)
7.
Press buttons 1 and 6 simultaneously for 6 seconds ( you will hear a longer beep and the Autotest
procedure will start automatically).
1
2
3
Fault messages:
The faults are the same as those of the Arcadia platform (see fi le "Arcadia Platform Fault Table") .
The fault will be displayed on the control console while the program progress LEDs fl ash rapidly.
Appliance response in the event of a fault:
In case of a fault the appliance will fi ll with water and drain continuously to prevent damage to the heating
element and possible fl ooding.
Fault Table reference:
2/2
See SQG WM 24 (Full) / SQG WM23 (Basic)
6
5
4