Indesit BWA 81683X W UK N Manuel rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} Indesit BWA 81683X W UK N. Indesit BWA 81683X W UK N 4 pages.
Imprimer la page
Easy iron
By selecting this function, the wash and spin cycles will be modified in
order to limit the formation of creases. At the end of the cycle the
washing machine's drum will rotate slowly; the EASY IRON and START/
PAUSE
indicator lights will flash and the
steady. To end the cycle, press the START/PAUSE
IRON button.
Delay timer
To set a delayed start for the selected cycle, press the corresponding
button repeatedly until the desired delay period has been reached
(3h-6h-9h). When the button is pressed for the fourth time, the option will
deactivate.
Once the START/PAUSE
button has been pressed, the delay time can
only be modified by decreasing it until the set cycle is launched.
Temperature
Each wash cycle has a pre-defined temperature. To modify the
temperature, press the
button.
Spin
Each wash cycle has a pre-defined spin speed. To modify the spin speed,
press the
button.
PUSH & GO
To start the PUSH & GO cycle press and hold the relative button for
2 seconds. The lit indicator light indicates that the cycle has started.
This wash cycle is ideal for cotton or synthetic fabrics, as it washes at a
temperature of 30°C and a maximum spin speed of 1.000 rpm. Max load
3,5 kg (cycle duration 45').
How does it work?
1. Load the laundry (cotton and/or synthetic garments) and close the
door.
2. Pour the detergent and additives.
3. Start the cycle by pressing and holding the PUSH & GO button for 2
seconds. The relevant indicator light will turn green and the door will lock
(the
symbol lights up).
N.B.: starting the wash cycle through the PUSH & GO button activates
an automatic non-customisable cycle recommended for cotton and
synthetic fabrics. This cycle does not allow for setting any additional
options.
To open the door while an automatic cycle is under way, press the START/
PAUSE
button; if the locked door symbol is off, the door may be
opened. Press the START/PAUSE
the point at which it was interrupted.
4. Once the programme is finished, the
CHILD LOCK
to activate the control panel lock, press and hold the button for
approximately 2 seconds. The lit
panel is locked. This prevents wash cycles from being modified
accidentally (except for the ON/OFF
children in the home. To deactivate the control panel lock, press and hold
the button for approximately 2 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed fibres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash
new coloured garments separately). Delicates (small garments – such as
nylon stockings – and items with hooks – such as bras: insert them in a
fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and
the drum. Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of
surplus detergent.
Use low temperature and longer duration
The most efficient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
"Wash Cycle Table" table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed
in the spinning phase, the higher the noise and the lower the remaining
moisture content.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washing machine
off and disconnect it from the mains power. Do not use flammable liquids to
clean the washing machine. Clean and maintain your washing machine
periodically (at least 4 times per year).
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all
maintenance work.
phase will remain lit
button or the EASY
button again to restart the cycle from
indicator light turns on.
symbol signals that the control
button), especially if there are
Clean the washing machine
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
abrasives.
The washing machine has a "Auto-clean" cycle for its internal parts; it must
be run without any load in the drum.
To optimise this cycle, it is possible to use either detergent (10% of the
quantity specified for lightly soiled garments) or special additives to clean
the washing machine. We recommend running a cleaning cycle every 40
wash cycles.
To start the cycle press buttons
5 seconds.
The cycle will start automatically and will run for about 70 minutes. To
stop the cycle, press the START/PAUSE
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated
frequently.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours
from forming.
Clean the pump
The washing machine is fitted with a auto-cleaning pump that does not
require any maintenance. Small items (such as coins or buttons) may
sometimes fall into the protective pre-chamber situated at the base of the
pump.
! Make sure the wash cycle has ended and unplug the appliance.
To access the pre-chamber:
1. remove the cover panel on the front of the machine by first pressing it
in the centre then pushing downwards on both sides to extract it;
2. loosen the drainage pump cover by turning it anti-clockwise: it is
normal for some water to leak out;
3. clean the inside thoroughly;
4. screw the cover back on;
5. put the panel back in place, making sure the hooks slot in place before
pushing the panel onto the appliance.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations and to distribute
the load in a uniform manner, the drum rotates continuously at a speed
which is slightly greater than the washing rotation speed. If, after several
attempts, the load is not balanced correctly, the machine spins at a
reduced spin speed. If the load is excessively unbalanced, the washing
machine performs the distribution process instead of spinning. To
encourage improved load distribution and balance, we recommend small
and large garments are mixed in the load.
ACCESSORIES
Contact our Technical Assistance Service to check whether the following
accessories are available for this washing machine model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of
your washing machine to save space and facilitate loading and unloading
of the tumble dryer.
TRANSPORT AND HANDLING
Do not lift the washing machine by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the filling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
"Health & Safety and Installation Guides".
and
simultaneously for
button.