Indesit IWE 8123 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Indesit IWE 8123. Indesit IWE 8123 16 pages.

Imprimer la page

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the

START/PAUSE indicator light will flash slowly in a green

colour.

2. LOAD THE LAUNDRY. Open the porthole door. Load

the laundry, making sure you do not exceed the maximum

load value indicated in the table of programmes on the

following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in "Detergents

and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Set the WASH CYCLE

knob to the desired programme; a temperature and spin

speed is set for each wash cycle; these may be adjusted.

The duration of the cycle will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modifying the temperature and/or spin

speed. The machine automatically displays the maximum

temperature and spin speed values set for the selected

cycle, or the most recently-used settings if they are

compatible with the selected cycle. The temperature can

be decreased by pressing the

wash "OFF" setting is reached. The spin speed may be

progressively reduced by pressing the

completely excluded (the "OFF" setting). If these buttons

are pressed again, the maximum values are restored.

Setting a delayed start.

To set a delayed start for the selected programme, press

the corresponding button repeatedly until the required

delay period has been reached. When this option is

enabled, the

symbol lights up on the display. To remove

the delayed start option press the button until the text

"OFF" appears on the display.

• Press the button to enable the option; the indicator light

corresponding to the button will switch on.

• Press the button again to disable the option; the

indicator light will switch off.

If the selected option is not compatible with the

programmed wash cycle, the indicator light will flash and

the option will not be activated.

If the selected option is not compatible with another

option which has been selected previously, the indicator

light corresponding to the first option selected will flash

and only the second option will be activated; the indicator

light corresponding to the enabled option will remain lit.

The options may affect the recommended load value

and/or the duration of the cycle.

button; the

button, until the cold

button, until it is

Modifying the cycle settings.

7. START THE PROGRAMME. Press the START/PAUSE

button. The corresponding indicator light will become

green, remaining lit in a fixed manner, and the door will

be locked (the DOOR LOCKED symbol

change a wash cycle while it is in progress, pause the

washing machine using the START/PAUSE button (the

START/PAUSE indicator light will flash slowly in an orange

colour); then select the desired cycle and press the START/

PAUSE button again.

To open the door while a cycle is in progress, press the

START/PAUSE button; if the DOOR LOCKED

switched off the door may be opened. Press the START/

PAUSE button again to restart the wash cycle from the

point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be indicated

by the text "END" on the display; when the DOOR LOCKED

symbol switches off the door may be opened. Open the

door, unload the laundry and switch off the machine.

If you wish to cancel a cycle which has already begun, press

and hold the

button. The cycle will be stopped and the

machine will switch off.

will be on). To

symbol is