Indesit IWME 147 Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Indesit IWME 147. Indesit IWME 147 20 pages.
Également pour Indesit IWME 147 : Manuel d'utilisation (20 pages)

Imprimer la page

Instructions for the fitter

Mounting the wooden panel onto the door and in-

serting the machine into cabinets:

In the case where the machine must be shipped for final

installation after the wooden panel has been mounted, we

suggest leaving it in its original packaging. The packaging

was designed to make it possible to mount the wooden

panel onto the machine without removing it completely (see

figures below).

The wooden panel that covers the face of the machine must

not be less than 18 mm in thickness and can be hinged on

either the right or left. For the sake of practicality when using

the machine, we recommend that the panel be hinged on

the same side as the door for the machine itself - the left.

Tur sei

Door Mounting Accessories (Fig. 1-2-3-4-5).

N° 2 Hinge Supports

Fig. 1

Fig. 3

N° 1 Rubber plug

Fig. 5

- No. 6 type A self-threading screws, l =13 mm.

- No. 2 type B metric, countersunk screws, l =25; for faste-

ning the magnet plate to the cabinet.

- No. 4 type C metric screws, l =15 mm; for mounting the

hinge supports to the cabinet.

- No. 4 type D metric screws, l =7 mm; for mounting the

hinges on the supports.

Mounting the Parts onto the Face of the Machine.

- Fit the hinge supports to the appliance front panel, positio-

ning the hole marked with an arrow in fig. 1 so that it is on the

inner side of the front panel. Fit a spacer (fig. 4/B) between

the surfaces using type C screws.

- Fit the magnet plate at the top of the opposite side, using

type B screws to fix two spacers (fig. 4/B) between the plate

and the surface.

N° 2 Hinges

Fig. 2

N° 1 Magnet

N° 1 Magnet plate

Fig. 4

N° 4 Spacers

Fig. 4/B