Indesit XWD 71683 Manuel d'utilisation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Indesit XWD 71683. Indesit XWD 71683 24 pages.

Imprimer la page

Connecting the drain hose

! We advise against the use of hose extensions;

if it is absolutely necessary, the extension must

have the same diameter as the original hose

and must not exceed 150 cm in length.

Electrical connections

Before plugging the appliance into the electri-

city socket, make sure that:

• the socket is earthed and complies with all

applicable laws;

• the socket is able to withstand the maximum

power load of the appliance as indicated in the

Technical data table (see opposite);

• the power supply voltage falls within the va-

lues indicated in the Technical data table (see

opposite);

• the socket is compatible with the plug of the

washing machine. If this is not the case, repla-

ce the socket or the plug.

! The washing machine must not be installed

outdoors, even in covered areas. It is extremely

dangerous to leave the appliance exposed to

rain, storms and other weather conditions.

! When the washing machine has been instal-

led, the electricity socket must remain within

easy reach.

Connect the drain

hose, without bending

it, to a drain duct or

a wall drain situated

between 65 and 100

cm from the floor;

alternatively, placed

it over the edge of a

basin, sink or tub, fa-

stening the duct sup-

plied to the tap (see

figure). The free end

of the hose should

not be underwater.

! Do not use extension cords or multiple sockets.

! The cable should not be bent or compressed.

! The power supply cable must only be repla-

ced by authorised technicians.

Warning! The company shall not be held re-

sponsible in the event that these standards are

not observed.

The first wash cycle

Once the appliance has been installed, and

before you use it for the first time, run a wash

cycle with detergent and no laundry, using the

wash cycle "Auto Clean" (see "Cleaning the

washing machine").

Technical data

XWD 71683

Model

width 59.5 cm

Dimensions

height 85 cm

depth 54 cm

Capacity

from 1 to 7 kg

Electrical

please refer to the technical

data plate fixed to the machine

connections

maximum pressure

1 MPa (10 bar)

Water

minimum pressure

connections

0.05 MPa (0.5 bar)

drum capacity 52 litres

Spin speed

up to 1600 rotations per minute

Test wash

cycles in

accordance

Programme 8:

Eco Cotton 60°.

with re-

gulations

Programme 8:

1061/2010

Eco Cotton 40°.

and

1015/2010

This appliance conforms to

the following EC Directives:

- 2004/108/EC (Electroma-

gnetic Compatibility)

- 2006/95/EC (Low Voltage)

- 2012/19/EU - WEEE