Indesit DSG 2631 Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Indesit DSG 2631. Indesit DSG 2631 28 pages.

Imprimer la page

Anti-condensation strip

After installing the dishwasher, open the door and stick the

adhesive transparent strip under the wooden shelf in order

to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and the

retaining elastic elements from the upper rack, if any.

Immediately before the fist washing,

dispenser with water and add only then approximately 1

(see chapter entitled Rinse aid and refined salt)

kg of salt

The water may overflow: this is normal and is not a cause

for concern. Select the water hardness value

entitled Rinse aid and refined salt).

poured into the machine, the LOW SALT indicator light

switches off.

If the salt container is not filled, the water softener and

the heating element may be damaged as a result.

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the

Troubleshooting guide (see Troubleshooting).

• Restart the programme to check whether the problem

has ceased to exist.

• If the problem persists, contact the Authorised

Technical Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• The type of malfunction.

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the appliance data plate

(see Description of the appliance) .

ECODESIGN REGULATION

ECO wash cycle is the standard cycle to which the energy label data refers; this cycle can be used to wash crockery with a nor-

mal soil level and is the most efficient in terms of energy and water consumption for this type of crockery. To reduce consumption

even further, only run the dishwasher when it is full.

Standby consumption: Left-on mode consumption: 3 W – Off mode consumption: 1,3 W

Consumption data table for the main cycles

Standard conditions

Energy consumption

(kWh/cycle)

1,30

INTENSIVE

1,05

NORMAL

Cycle data refers to the values recorded in a laboratory, in accordance with European standard EN 50242.

Data is obtained by recording values when the appliance is operational and loaded with user crockery.

completely fill the salt

(see chapter

- After the salt has been

Water consumption

Duration

(l/cycle)

(min/cycle)

150

115

The machine has a buzzer/set of tones

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

(depending on the dishwasher model)

light

The display

provides useful information concerning the

type of wash cycle, drying/wash-cycle phase, remaining

time, temperature etc.

Technical data

width 45 cm

Dimensions

height 85 cm

depth 60 cm

Capacity

10 standard place-settings

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

Water supply pressure

7,25 – 145 psi

Power supply voltage

See appliance data plate

Total absorbed power

See appliance data plate

Fuse

See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

User conditions

Energy consumption

Water consumption

(kWh/cycle)

(l/cycle)

1,15

0,95

(depending on the

Duration (min/

cycle)

140

110