Indesit LFT 21677 Manuel d'utilisation - Page 23

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Indesit LFT 21677. Indesit LFT 21677 28 pages.

Care and maintenance

Clean the water inlet filter at the tap outlet regularly.

- Turn off the water tap.

- Unscrew the end of the water inlet hose, remove the

filter and clean it carefully under running water.

- Replace the filter and screw the water hose back into

position.

The filter assembly consists of three filters which remove

food residues from the washing water and then

recirculate the water. They should be cleaned if you wish

to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if

the filter is loose.

After several washes, check the filter assembly and if

necessary clean it thoroughly under running water, using

a non-metallic brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise

direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on

the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER

REMOVE the wash cycle pump (black detail) (fig. 4).

After cleaning the filters, replace the filter assembly and

fix it in position correctly; this is essential for maintaining

the efficient operation of the dishwasher.

Leaving the machine unused for

extended periods

Disconnect the appliance from the electricity supply

and shut off the water tap.

Leave the door of the appliance ajar.

When you return, run a wash cycle when the

dishwasher is empty.