Indesit FIDM20 Manuel d'instructions pour l'installation et l'utilisation - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'installation et l'utilisation pour {nom_de_la_catégorie} Indesit FIDM20. Indesit FIDM20 44 pages. Electric built in double oven

Imprimer la page
Care and Cleaning
3. OVEN DOORS
CONTROL PANEL
TRIMS
4. REPLACEMENT OF THE OVEN LAMP
MAIN OVEN LAMP
5. HOW TO CLEAN THE LAMP LENS
MAIN OVEN LAMP
35
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish with a
clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent any
build up of soiling which may detract from the appearance of
the cooker. The recommended method of cleaning is to wipe
over the trims with a clean, soft cloth wrung out in warm
water, or mild non abrasive cleaner.
(If in doubt try the cleaner on a small area of trim which is
OVEN
DOORS
not noticeable in normal use), then after wiping with a cloth
wrung out in clear water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed.
Stubborn stains can be removed by using a well soaped, fine
steel wool soap pad.
(d) Stainless Trims (SS models only)
Regularly wipe with a clean, damp cloth and polish with a
clean dry cloth.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass.
Warning: To avoid electric shocks - please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold, before removing lamp lens.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit replacement
bulb (15W 300°C SES). Fit replacement bulb and refit lens.
Warning: To avoid electric shocks - please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold, before cleaning lamp lens.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass lens