AEG A71109TSW0 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG A71109TSW0. AEG A71109TSW0 36 pages.

Technical data

Problem

Green indicator flashing

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension

Rising Time

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for

optimum performance install this appliance at a location where the ambient temperature

corresponds to the climate class indicated on the rating plate of the appliance:

Climate class

Possible cause

There is no voltage in the mains

socket (try to connect another

appliance into it)

The appliance is not switched on Switch on the appliance

Temperature Regulator is not on Check the Temperature Regulator

Temperature sensor problem

Height

Width

Depth

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Call an electrician

Call the service personnel

850 mm

595 mm

635 mm

24 h

Ambient temperature

Solution