AEG AGN81400C0 Manuel de l'utilisateur - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AEG AGN81400C0. AEG AGN81400C0 48 pages.

Imprimer la page

Problem

There is too much frost and

ice.

The compressor does not

start immediately after

pressing the FROSTMATIC,

or after changing the tem-

perature.

Water flows on the floor.

Temperature cannot be set.

DEMO appears on the dis-

play.

The temperature in the ap-

pliance is too low/too high.

Possible cause

The FROSTMATIC function

is switched on.

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Food products are not wrap-

ped properly.

This is normal, no error has

occurred.

The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

The FROSTMATIC or COOL-

MATIC function is switched

on.

The appliance is in demon-

stration mode.

The temperature regulator is

not set correctly.

The door is not closed cor-

rectly.

The food products' tempera-

ture is too high.

Many food products are

stored at the same time.

The door has been opened

often.

The FROSTMATIC function

is switched on.

ENGLISH

Solution

Refer to "FROSTMATIC

function".

Refer to "Closing the door".

Wrap the food products bet-

ter.

The compressor starts after a

period of time.

Attach the melting water

outlet to the evaporative

tray.

Switch off FROSTMATIC or

COOLMATIC manually, or

wait until the function resets

automatically to set the tem-

perature. Refer to "FROST-

MATIC or COOLMATIC

function".

Keep the OK button pressed

for approximately 10 sec-

onds until a long sound is

heard and display shuts off

for a short time.

Set a higher/lower tempera-

ture.

Refer to "Closing the door".

Let the food products tem-

perature decrease to room

temperature before storage.

Store less food products at

the same time.

Open the door only if neces-

sary.

Refer to "FROSTMATIC

function".