AEG ARCTIS Manuel d'utilisation - Page 15

7. Place washer (B) between door

and door pivot at bottom left,

and turn pivot pin (A) into lower

door pivot at the left.

8. Reposition door handle and hole

plug-pins as shown in the dia-

gram.

9. Replace base cover.

Door Alignment

If necessary, the appliance door can be aligned.

1. First remove the door (see section: "Reversing the Door").

2. Pry out the eccentric pivot bushings at the top and/or at the bottom of

the door as needed with a small screw driver, turn as shown in the dia-

gram and press back into place.

The diagram only shows a right opening door.

For left opening doors please proceed accordingly at the left of the

door at top and/or bottom.

3. Replace the door (see section: "Reversing the Door")