AEG ARCTIS 1050-8 GS Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG ARCTIS 1050-8 GS. AEG ARCTIS 1050-8 GS 24 pages. Table top electronic freezer

Imprimer la page

Installation

Installation Location

The appliance should be set up in a well ventilated, dry room.

Energy use and efficient performance of the appliance is affected by

the ambient temperature.

The appliance should therefore

– not be exposed to direct sunlight;

– not be installed next to radiators, cookers or other sources of heat;

– only be installed at a location whose ambient temperature

corresponds to the climate classification, for which the appliance is

designed.

The climate classification can be found on the serial plate, which is

located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for

each climate classification:

Climate classification

If the refrigeration appliance is installed next to another refrigerator

or freezer a clearance of 5 cm at the sides is required, in order to pre-

vent the formation of condensation on the outside of the appliance.

Your freezer needs air

For correct operation this appliance must be located in a dry atmos-

phere, away from heat sources, e.g. cookers, radiators, boilers and

direct sunlight.

You should also ensure that air can circulate freely around the back

and the top of the cabinet. There should be 100mm (4") between the

top of the cabinet and any overhanging kitchen furniture.

Alternatively allow 50mm (2") between the top of the cabinet and any

overhanging kitchen furniture and a gap of 25mm (1") on either side

of the appliance.

for an ambient temperature of

+10 to +32 °C

+16 to +32 °C

+18 to +38 °C

+18 to +43 °C