AEG ARCTIS 1333-6 i Instructions d'utilisation et d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG ARCTIS 1333-6 i. AEG ARCTIS 1333-6 i 24 pages. Aeg integrating freezer arctis
Également pour AEG ARCTIS 1333-6 i : Instructions d'utilisation et d'installation (24 pages), Manuel d'utilisation et d'installation (23 pages)
Imprimer la page¥ By attaching the included index-tabs to the drawers, they can be
marked according to which type of foods the individual compart-
ments contain.
Defrosting
The freezer compartment, however, will become progressively cove-
red with frost. This should be removed with the special plastic scraper
provided, whenever the thickness of the frost exceeds 4 mm. During
this operation it is not necessary to switch off the power supply or to
remove the foodstuffs.
However when the ice becomes very thick on the inner liner, comple-
te defrosting should be carried out as follows:
1.
Remove the frozen food from
the freezer, wrap it in several
layers of newspaper and put it
in a very cool place.
2.
Switch off the appliance and
pull out the plug, or turn the
temperature regulator to Ò0Ó.
3.
Leave the freezer compart-
ment door open.
4.
Insert the plastic scraper into
the recess provided under the
defrost water channel and pla-
ce a collecting basin under it.
5.
Once defrosting is completed keep the scraper for future use;
6.
Turn the thermostat knob to the required setting or replace the plug in
the power socket.
Warning!
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up
the thawing process other than those recommended by the manufac-
turer.
A temperature rise of the frozen food packs, during defrosting , may
shorten their safe storage life.
11