AEG ARCTIS 818 35 94-01/2 Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AEG ARCTIS 818 35 94-01/2. AEG ARCTIS 818 35 94-01/2 36 pages. Electronic freezer no_frost

Imprimer la page

1. Control Panel

Before Use

Packaging

1. Remove all adhesive tape and packaging from the interior of the appli-

ance.

Any remnants of adhesive can be removed with white spirit.

2. Remove the transport protection pieces and pull off the adhesive tape.

3. Wash the inside of the appliance with lukewarm water with a little

bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap

or detergent as the smell may linger. Dry the appliance thoroughly.

Fitting the Door Handle

Caution! Do not overtighten the screws (max. 2 Nm) as you may

damage the door handles.

1. Screw the top handle bracket to the

handle rod (1). Fit the bottom han-

dle bracket on the lower left-hand

side of the door (2).

2. Fit the top handle bracket on the

top left-hand side of the door (3)

and screw the handle rod to the

bottom handle bracket (4).

818 35 94-01/2