A-Neuvideo ANI-16-4K60 Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} A-Neuvideo ANI-16-4K60. A-Neuvideo ANI-16-4K60 16 pages. 16x16 hdmi matrix switcher w/ smart edid management
Imprimer la pageA
NEUVIDEO
Remote Control
IR CODES
CUSTOM CODE: 08F7
POWER:
08F7
INPUT 1:
08F7
INPUT 2:
08F7
INPUT 3:
08F7
INPUT 4:
08F7
INPUT 5:
08F7
INPUT 6:
08F7
INPUT 7:
08F7
INPUT 8:
08F7
POWER:
INPUT 0~9:
NOTE: You must select two numbers when you select input signal source. For
example, if you want to select input signal source 1, you need to press '0' button and
then '1' button.
PTP BUTTON:
Output area. It will be one-to-one output. For example, when you press the PTP
button and then select the second output source. The second output port outputs
signal from the second input source.
OUTPUT 0~9:
NOTE: You must select two numbers when you select one output signal source. For
example, if you want to select the first output signal source, you need to press '0'
button and then '1' button.
ALL BUTTON:
Press the PTP button and then press the 'All' button, all input and output signal
sources will be output one-to-one. Press the first input source and then press 'All'
button, the first input source will output to all output ports.
OPERATION INSTRUCTIONS:
4DB2
INPUT 9:
08F7
INPUT 0:
48B7
OUTPUT PTP: 08F7
4BB4
OUTPUT ALL: 08F7
43BC
OUTPUT 1:
0CF3
OUTPUT 2:
19E6
OUTPUT 3:
0FF0
OUTPUT 4:
03FC
OUTPUT 5:
Power on or set the unit to standby status.
Select one input signal source.
Press the PTP button and then select one output source in the 0~9
Select one output signal source.
Press this button to select all output signal source simultaneously.
• Select the input buttons and then select the output buttons to display the
corresponding input signal source.
• When you use the remote control to select the input and output source, select
one input source to many outputs, select the 'OUTPUT' port on the front
panel OLED screen. Then press the 'OK' button to confirm. For example,
select the first input source and then press the 'OK' button. You can select 01,
02,13,14, etc. output from the 'OUTPUT' port on the front panel OLED screen
and then press the 'OK' button. At this time, the first input source will output
to 01, 02, 13,14, etc. port.
08F7
55AA
08F7
57A8
17E8
53AC
08F7
40BF
08F7
10EF
08F7
11EE
08F7
52AD
08F7
4FB0
4
Remote Control
OUTPUT 6:
08F7
OUTPUT 7:
08F7
OUTPUT 8:
08F7
OUTPUT 9:
08F7
OUTPUT 0:
08F7
44BB
50AF
0EF1
13EC
12ED