A-Neuvideo ANI-62HDRH Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} A-Neuvideo ANI-62HDRH. A-Neuvideo ANI-62HDRH 20 pages. 4k uhd+ hdr 6x2 hdmi matrix w/audio de-embedding

Imprimer la page

NEUVIDEO

Remote Control

POWER:

Press this button to switch the unit between On and Stand-by mode.

OUT A~B:

Press the button (A or B) of the output(s) you wish to route a source to.

Pressing an OUT button a second time will de-select that output.

INFO:

Press to show the current input/ output routing and detected resolution on each

output's OSD.

MUTE:

Press this button to route a blank audio/video source to the selected output(s).

MENU:

Press to enter the LCD menu, or to back out from menu items.

LOCK:

Press to lock all button functions on the front panel. Press and hold for 3

seconds to release the lock function.

ALL:

Press to select all outputs simultaneously for routing. Press it a second time to

de-select all outputs.

CONFIRM:

Press to confirm and activate newly made input/output routing selections.

CANCEL:

Press to cancel/undo any un-confirmed routing change selections.

PRESET:

Press to enter the preset recall menu in the LCD window. Press the numbered

"IN" button of the Preset you wish to activate followed by the "TAKE" button to activate it.

IN 1~6:

After selecting one or more outputs, press the "IN" button of the input (1~6) you

wish to route to the selected output(s). In Preset selection mode, these buttons are used

to select the saved preset to use.

ENTER:

Press to confirm a selection within the LCD menu or to go deeper into a menu item.

+ & −:

Press to move up and down or adjust selections within the LCD menus.

HEX CODES

CUSTOM CODE: 8013

POWER:

8013

IN1:

8013

IN2:

8013

IN3:

8013

IN4:

8013

IN5:

8013

IN6:

8013

MUTE:

8013

OUT A:

8013

OUT B:

8013

CANCEL:

CONFIRM:

MENU:

ENTER:

UP:

DOWN:

ALL:

PRESET:

LOCK:

INFO:

Remote Control & IR Cable Pin Assignment

8013