AEG SANTO C 7 18 40-4I Instructions d'utilisation et d'installation - Page 18

Switching off the appliance

To switch off, press the ON/OFF button for approx. 5 seconds. This will

result in a countdown from "3" to "1" taking place in the temperature

display. On reaching "1" the fridge will switch off. The temperature

display will go off.

Note: The appliance cannot be switched on or off if unplugged, or if

there is no power being supplied to it. Following connection to the

mains power supply, the appliance returns to the same operating state

as before the interruption of main power.

If the appliance is not going to be used for an extended period:

1. Remove all refrigerated packages.

2. Switch off the appliance by holding down the ON/OFF button until

the display goes off (see above).

3. Remove the mains plug or switch off or disconnect from the electric-

ity supply.

4. Clean thoroughly (see section "Cleaning and Care").

5. Leave the doors open to avoid the build up of odours.