AEG SANTO C 7 18 41-4I Instructions d'utilisation et d'installation - Page 23

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG SANTO C 7 18 41-4I. AEG SANTO C 7 18 41-4I 28 pages. Integrating fridge freezer
Également pour AEG SANTO C 7 18 41-4I : Instructions d'utilisation et d'installation (15 pages), Instructions d'utilisation et d'installation (29 pages), Instructions d'utilisation et d'installation (28 pages)

Fix cover (C) on guide (A) until it clips

into place.

Open the appliance door and the fur-

niture door at 90°. Insert the small

square (B) into guide (A). Put togeth-

er the appliance door and the furni-

ture door and mark the holes as indi-

cated in the figure. Remove the

squares and drill holes with ø 2 mm

at 8 mm from the outer edge of the

door. Place the small square on the

guide again and fix it with the screws

supplied.

At the end of installation/adjusting, it

is necessary to check if the door of

the furniture closes properly.

Should adjustment of the furniture

door be necessary, use the clearance

of slots.