AEG SANTO C 8 18 43-4I Instructions d'utilisation et d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG SANTO C 8 18 43-4I. AEG SANTO C 8 18 43-4I 28 pages. Integrated fridge freezer
Également pour AEG SANTO C 8 18 43-4I : Instructions d'utilisation et d'installation (13 pages), Instructions d'utilisation et d'installation (28 pages), Instructions d'utilisation et d'installation (24 pages)

Switching the Appliance off

To switch off, hold down the ON/OFF button for approx. 5 seconds. This will

result in a countdown from "3" to "1" taking place in the temperature

display. On reaching "1" the fridge will switch off. The temperature display

will go off.

Note:

The appliance cannot be switched on or off if unplugged, or if there is no

power being supplied to it. Following connection to the mains power sup-

ply, the appliance returns to the same operating state as before the inter-

ruption of main power.

If the appliance is not going to be used for an extended period:

Switch off the appliance, holding down the ON/OFF button until the display

goes off (see above).

Remove the mains plug or switch off or turn out the circuit breaker or fuse.

Defrost the freezer compartment and clean the appliance thoroughly (see

section: "Cleaning and Maintenance").

Finally, leave the doors open to avoid a build up of odours.