AEG 2600 D Instructions d'utilisation et d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG 2600 D. AEG 2600 D 20 pages.
Également pour AEG 2600 D : Manuel d'utilisation et d'installation (16 pages)
Imprimer la page
Remove the upper glass panel
The upper glass panel can be removed for cleaning.
• Remove the grease filters.
• Pull the handle L down. Fig. 5.
• Remove the glass panel.
Warning
• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.
Changing the light bulb
• Disconnect the cooker hood from the main supply.
• Remove the lamp cover, use a screw driver as a lever. Fig. 6.
• Replace the old bulb with a new one of the same type.
• Remount the lamp cover.
• If the light does not come on, make sure the bulb has been inserted
in correctly before contacting the technical assistance service.
Fig. 5
Fig. 6
L
11