AEG CHDD 8694 Instructions d'utilisation et d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} AEG CHDD 8694. AEG CHDD 8694 20 pages. Cooker hood
Également pour AEG CHDD 8694 : Instructions d'utilisation et d'installation (20 pages), Instructions d'utilisation et d'installation (20 pages)

Technical Details

Dimensions - extractor version (in cm):

Height - Width - Depth 78,5/120 - 89,8 - 50,5

Maximum absorbed power:

Motor absorption:

Lighting:

Length of the cable:

1 deflector

1 chimney support

1 reduction flange Ø 125-120 mm

1 remote control

1 charcoal filter (already fitted)

1 support bracket

8 wood-screws 5 x 45 mm (for wall mounting - 2 as spare parts)

8 wall plugs Ø 8 mm (for wall mounting - 2 as spare parts)

6 washers (2 for chimney supprot - 2 for lower fixing - 2 as spare

parts)

6 metal screws 3,5 x 9,5 (for chimney, deflector and connection flange

- 2 as spare parts)

2 metal screws 3,5 x 6,5 (for connection block and circuit board

support).

We reserve the right to change specifications and colours as a result

of our policy of continuing technological development.

The electric outlet should be placed on the wall inside the chimney.

The hood has a power cable, 150 cm, with earth connection and the

rated voltage is 220 - 240 V.

Connect the hood to the mains supply via a double pole switch

which has 3 mm minimum separation between the contacts.

The switch must be accessible at all times.

The following is valid in the United Kingdom only:

- the wire which is coloured green and yellow must be connected to

the terminal which is marked with the letter E or by the earth symbol

(

), or coloured green or green and yellow;

- the wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black, -

- the wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.

340 W

1 x 300 W

2 x 20W

120 cm