AEG CHDD 8795 Manuel d'utilisation et d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} AEG CHDD 8795. AEG CHDD 8795 17 pages. Electrolux cooker hood range hood models dd 8794 dd 8795 chdd 8795 operating and installation instructions
Également pour AEG CHDD 8795 : Instructions d'utilisation et d'installation (18 pages), Manuel d'utilisation et d'installation (22 pages), Instructions d'utilisation et d'installation (22 pages)

• Fix the sides of the

cooker hood by

fastening the pins (10a)

to the sides of the

fastening screws (10b).

Only DD 8794: side

panels are available as a

special accessory

please contact your local

Service Force Centre (or

see paragraph "Special

Accessory").

Block the sides sliding

the two tabs outwards

(11).

• Make electrical

connection (12), but leave the hood disconnected from the home

general electric panel.

• In the case that it is decided to use the cooker hood in the suction

version, then place one of the two flanges provided in the exit hole

(13 – Suction). Attention! The tall flange should be used when a

telescopic chimney is required to be mounted (this item should be

ordered – see special accessories), the short flange is to be used in

all other cases.

• Remount the grease filter and the frontal screens

according to the numbering

noted also on the back of each

screen (from 1 to 4 from the top

to the bottom).

• Connect the hood the the home

general electric panel and check

if the hood work properly.

Fig. 11

Fig. 10

Extractor version

Filter version