A-Neuvideo ANI-5PLAY Manuel d'instruction - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} A-Neuvideo ANI-5PLAY. A-Neuvideo ANI-5PLAY 12 pages. Hdmi + lan extender poh cat5e/cat6 hdbaset
Également pour A-Neuvideo ANI-5PLAY : Manuel d'instruction (10 pages)
Imprimer la page
A
NEUVIDEO
RECEIVER
OUTPUT LED:
Output status indicating lamp. This red LED illuminates when the TV is connected to a HDMI cable.
q
HDMI OUT:
HDMI output port. This slot is where you connect the HDTV or monitor with a HDMI cable.
w
ETHERNET:
This slot provides internet signal from the transmitter or to the transmitter.
e
RS-232:
Phoenix jack provides Serial port control from the transmitter or to the transmitter.
r
DC IN:
Plugs the 24V DC power supply into the unit.
t
IR RX:
Chanel 2 IR Receiver. Connects with the Wideband IR Rx.
y
IR TX:
Chanel 1 IR Transmitter. Connects with the Wideband IR Tx.
u
LINK LED:
The connection status indicating lamp.
i
• Illuminated:
The Transmitter and Receiver have good connections.
• Flashing:
The Transmitter and Receiver have poor connections.
• Dark:
The Transmitter and Receiver are not connected.
HDBaseT
IN:
HDBaseT
o
™
standards.
DATA LED:
Data status indicating lamp.
a
• Illuminated:
The HDMI signal has HDCP.
• Flashing:
The HDMI signal is without HDCP.
• Dark:
No HDMI signal.
signal input port. Connects the HDBaseT
™
OPERATION CONTROLS AND FUNCTIONS
transmitter with a UTP cable following IEEE-568A or IEEE-568B
™
5