A-Neuvideo ANI-HDB70 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} A-Neuvideo ANI-HDB70. A-Neuvideo ANI-HDB70 7 pages. Hdmi extender over hdbaset
Également pour A-Neuvideo ANI-HDB70 : Manuel d'instruction (8 pages)

Imprimer la page

CONTENTS

INTRODUCTION AND CONTENTS .................................1

FEATURES AND SPECIFICATIONS ................................2

OPERATION CONTROLS AND FUNCTIONS ................3

APPLICATION EXAMPLE & IR EXAMPLE .......................4

INTRODUCTION

The ANI-HDB70 HDMI Extender over HDBaseT (single CAT5e/6/7)

is a tool for extending your HDMI signal over long distances to

a compatible display. It is designed to convert HDMI signal to

standard HDBaseT signal and transmit by dedicated CATx cable.

It also supports Bidirectional Infrared (IR) signal together with the

HDMI signal, so you can control the Source device or the display.

The ANI-HDB70 operates at 1080p up to 230 feet (70m) using

CAT5e or better. The greatest feature is the PoH (Power over

HDBaseT) also known as PoE (Power over Ethernet or PoCC

Power over Category Cable).

You only need one power supply (included) that provides power

to both the transmitter and the receiver. You can install the PoH

power supply on either the Transmitter or the Receiver.

PACKAGE CONTENTS

Check that you have the following components;

(1) ANI-HDB70 Extender Transmitter

(1) ANI-HDB70 Extender Receiver

(2) IR Transmitter

(2) IR Receiver

(1) Users Guide

(1) 12V 2.5A DC Power Supply adapter

TABLE OF CONTENTS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

• Do not allow anything to rest on the power cabling or allow any

• To protect the unit from overheating, do not block any vents or

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise - without express written permission and consent

Version 1.4 MAR 2014

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

electrical shock and injury to persons.

moisture or install this product near water.

openings or empty slots in the unit, as you may damage parts

inside the unit.

PSU if it is damaged.

weight to be placed upon it or any person walk on it.

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

TRADEMARK ACKNOWLEDGMENTS