AEG protect d. 2000 Manuel d'installation et d'utilisation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AEG protect d. 2000. AEG protect d. 2000 25 pages. Fume extractor hood

Imprimer la page

Hand washing

Soak grease filters for about one hour in hot water with a

grease-loosening cleaner, then rinse off thoroughly with

hot water. Repeat the process if necessary. Refit the

grease filters when it are dry.

Dishwasher machine

Place grease filters in dish washer. Select most powerful

washing programme and highest temperature, at least

65°C. Repeat the process. Refit the grease filters when it

are dry.

When washing the metal grease filter in the dishwasher a

slight discoloration of the filter can occur.

Wait until the filters are completely dry, then replace

them in their original positions, taking care that there are

no gaps between the two filters.

Screw the fuses back in or reset the automatic circuit

breaker.

Select any fan speed using my

then press my

continuing to hold them down for at least 3 seconds until

the flashing letter F stops being shown on the display (D)

and then press the

The activated carbon filter display is now ready for use

again.

B and

F buttons at the same time,

button B.

E or

F buttons and