A-Neuvideo ANI-2PIP-LOGO Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} A-Neuvideo ANI-2PIP-LOGO. A-Neuvideo ANI-2PIP-LOGO 15 pages. 2x1 hdmi multiviewer
Également pour A-Neuvideo ANI-2PIP-LOGO : Manuel d'instruction (20 pages)
Imprimer la page
RS-232
RS-232 Pin Definition
PIN
ASSIGNMENT
1
NC
2
TxD
3
RxD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
Baud Rate: 110 ~ 921600
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
PIN
ASSIGNMENT
1
NC
2
RxD
3
TxD
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
8
Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and the PC/laptop are
connected to the same active network.
To Access Telnet
Windows 7
Click START, type "cmd" in the search field and press ENTER.
Windows 10
1. Open "Control Panel".
2. Open "Programs and Features".
3. Select the "Turn Windows features on or off " option.
4. Check the "Telnet Client" box.
5. Click "OK". A box will appear that says "Windows Features" and "Search-
ing for required files". When complete, the Telnet client should be installed
in Windows.
In Mac OS X
Click Go > Applications > Utilities > Terminal.
Once in the Command Line Interface (CLI) type "telnet" followed by the IP address of the unit (and
the port number if it is non standard) and then hit "Enter". This will connect us to the unit we wish to
control. Type "help" to list the available commands. See below for reference.
NOTE: If the IP address is changed then the IP address required for Telnet access will also change
accordingly.
9