Kohler C3-230 Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Kohler C3-230. Kohler C3-230 41 pages. Elongated bidet toilet seat with remote control
Également pour Kohler C3-230 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel (2 pages), Manuel de démarrage rapide (2 pages)

E - Front

Press FRONT WASH button to activate front wash (female exclusive

use) and the current flushing intensity will be shown. In the front wash

state, the flushing intensity can be changed first from low to high and

then from high to low stage by stage cyclically by continuously

pressing the FRONT WASH button. It will stop automatically after 300

seconds of continuous flushing.

F - Pulsate+Oscillate

In the flush state, press this button to activate pulsating flush.

The feature will be changed cyclically from pulsate, oscillate,

pulsate/oscillate, pulsate/oscillate off (return to front or rear flush), and

the corresponding small lamp will be lit. If the pulsate/oscillate flush is

turned off (return to front or rear flush) the indicator light will not light.

The Bidet is equipped with Wide Oscillate function. If you would like to

use Wide Oscillate function, please hold pulsate/oscillate key about

2s to activate rear wash and pulsate flush.

G - Water temperature

The temperature of flushing water can be changed first from low to high

and then from high to low, stage by stage, and back to off again,

cyclically by pressing the WATER TEMPERATURE button. The

indicators will be lit up to show the parameter of corresponding water

temperature. If it is turned off, the indicator will not light.

H - Seat temperature

The temperature of the ring can be changed first from low to high and

then from high to low stage by stage, and back to off again, cyclically

by pressing the RING TEMPERATURE button. The indicators will be lit

up to show the parameter of corresponding ring temperature. If it is

turned off, the indicator will not light.

Press and hold the RING TEMPERATURE button for 2 seconds, the

energy-saving feature will be turned on (with a short tone) or turn off

(with a long tone). The ring temperature light flashing indicates that the

energy-saving feature is turned on; while the ring temperature light stop

flashing indicates that the energy-saving feature is turned off, or while

being seated, the cistern and seat heaters will be turned off.

One week after the activation, the ring performs an automatic detection

in user's habitual routine. Starting from the second week, the ring

automatically gets itself into Power Save mode when it is less used,

depending on the detected user routine of the first week.

During the third week, the ring bases its judgment on the data collected

during the previous week to decide when it enters into Power Save

mode. It works the same for the following weeks.

Kohler Co.

1223525-T01-M