Kohler K-1246 Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Kohler K-1246. Kohler K-1246 4 pages. Bath whirlpool
Également pour Kohler K-1246 : Manuel du propriétaire (32 pages), Manuel d'installation (4 pages), Manuel d'installation (48 pages), Manuel d'installation (44 pages), Manuel d'installation (48 pages)
1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
1-1/2" OD
Product Information
Drop-in bath whirlpool with custom
pump location
Drop-in bath whirlpool with custom
pump location
Fixture*:
basin area
Bathing
44" (111.8 cm) x
well
31" (78.7 cm)
water depth
To
15" (38.1 cm)
overflow
* Approximate measurements for comparison only.
Pump:
Hp
1-speed
1.25
Included Component:
Cutout template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
1013770-1-B
K-1246-CD
Pump/Control Access 20" (50.8 cm)
W x 15" (38.1 cm) H Min (Typical)
12-5/16" (31.3 cm)
5-3/8" (13.7 cm)
16-1/16"
17"
(40.8 cm)
(43.2 cm)
3-1/2"
21"
(8.9 cm)
(53.3 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1246-CD
shown
(top view
only)
K-1246-CF
shown
top area
weight
50" (127 cm) x
110 lbs
34" (86.4 cm)
(49.9 kg)
capacity
69 gal (261.2 L)
V
Hz
A
120
60
7.5
113926-7
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
7-1/2"
(19.1 cm)
Max
60" (152.4 cm)
1-3/16" (3 cm)
Notes
Install this product according to the installation guide.
Floor support under the whirlpool must provide for a minimum of
1200 lbs (544.3 kg) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
5"
(12.7 cm)
Max
K-1246-CF
Pump/Control Access
20" (50.8 cm) W x 15"
(38.1 cm) H Min
(Typical)
Kohler Co.